The Construction (Design and Management) Regulations, known as the CDM regulations, are a set of health and safety regulations that apply specifically to construction projects. These regulations apply to all construction projects of all sizes and were most recently updated in 2015.

Checklist

This module is used to create various checklists ie HSE, CDM-C, Site Health and Safety etc.

Figure 1.1 - Checklist Register

You can select checklists from the library and add your own checklists to the library for use in any project. 

You can have any number of checklist in a project and you can have multiple copies of the same checklist, for example, you may want a checklist for each supplier that you are using for a project.

Figure 1.2 - New Checklist

Once the checklist has been created, select edit to make any changes.

Figure 1.3 - Edit Checklist

Once you have completed your checklist, it can be easily printed.

Figure 1.4 - Printed Checklist

Hazards/Risk Assessment

This module is used to create Hazard Reports.

Figure 2.1 - Hazard Register

Once you create a new Hazard Report, fill in the necessary fields.

Figure 2.2 - New Hazard

There is also a sub section for Risk Assessment, select the New Button to create a new Risk Assessment.

Figure 2.3 - Risk Assessment

Once you have completed the risk assessment, select save and close.

Below is a print preview of a completed Risk Assessment.

Figure 2.4 - Risk Assessment Report

HSE Notification

This module is used to produce a Health and Safety Executive Notification.

Figure 3.1 - HSE Notification Register

Select New to create a new HSE Notification and complete the necessary fields.

Figure 3.2 - New HSE Notification

Once completed, save and close, the document is now ready for printing.

Figure 3.2 - HSE Notification Report